Electro-static discharge (ESD) protection is a technology that protects the MEC products from malfunction or breakdown due to a sudden discharge of electrcity caused by contact between two electrically charged objects. Static electricity is constantly building in electronics, so this protection prevents electronics from suffering damages.
Cervoz has professionally designed a protection that is certified by an SGS lab that will prevent any electrical discharges or surges from its devices.
Over-provisioning is a function that sets aside space for the SSD's provisional use. These free blocks allow the SSD to operate at normal speed while other functions such as wear-leveling or garbage collection are taking place. The blocks also serve as replacements for bad blocks that may be detected by bad block management.
IOPS (Inputs/Outputs per Second) is an important indicator of the performance for a hard disk driver or solid-state drive. The IOPS indicates how many input and output (or read and write, respectively) operations the storage device can complete within a second. While it cannot guarantee real-world performance, the IOPS is a benchmark for the speed and capacity of the storage device. IOPS should not be confused with data transfer rate which is calculated in MHz.
The difference between the two is their respective error correction capabilities. BCH, the earlier technology, can no longer meet error correction demands of the newest generation of Flash storage. LDPC, with its ability to correct more error per pages, is the go-to choice for industrial-grade storage for reliability and data integrity.
The purpose of Cervoz Industrial SSD|Flash Storage Powerguard Technology is to protect data loss while encountering an improper power failure. Powerguard would complete the task of saving your files from the controller DRAM into the flash storage after sudden power loss. Cervoz designs our flash modules with additional tantalum capacitors to store these extra charges. With this special design, SSD|Flash Storage is constantly charging the tantalum capacitors with 12V power during its operation.
Cervoz Industrial Powerguard 2.5" SATA SSD MLC and T376 Family include capacities from 32GB~512GB and 128GB~1TB; they are suitable for critical industrial applications, such as networking, server/cloud, vehicle, medical and surveillance.
Cervoz Industrial Powerguard 2.5" SATA SSD MLC and T376 Family include capacities from 32GB~512GB and 128GB~1TB; they are suitable for critical industrial applications, such as networking, server/cloud, vehicle, medical and surveillance.
Wear Leveling is a mechanism/algorithm an SSD uses to enhance its longevity. The purpose of Wear Levelling is to distribute P/E cycles to all the blocks evenly; therefore they can reach their P/E threshold at the same time.
The TRIM command allows the OS to acknowledge the SSD controller the locations of unwanted pages proactively, saving operating time in the next write operation.
NAND flash only writes data at the block level. When TRIM is active, and there is data to be erased or written, the SSD manages to write data into blank blocks with efficiency.
TRIM is only active when both the operating system and the flash controller both support and enable this function.
NAND flash only writes data at the block level. When TRIM is active, and there is data to be erased or written, the SSD manages to write data into blank blocks with efficiency.
TRIM is only active when both the operating system and the flash controller both support and enable this function.
S.M.A.R.T (Self-Monitoring Analysis and Reporting Technology) is a diagnosis system for hard disks drives and solid-state drives. S.M.A.R.T monitors a set of attributes relating to the drive’s reliability and anticipates to report malfunctions.
The purpose of Cervoz Industrial SSD Flash Storage Powerguard Technology is to protect data loss while encountering an improper power failure. Powerguard would complete the task of saving your files from the controller DRAM into the flash storage after sudden power loss. Cervoz designs our flash modules with additional tantalum capacitors to store these extra charges. With this special design, SSD|Flash Storage is constantly charging the tantalum capacitors with 12V power during its operation.
Cervoz Industrial Powerguard 2.5" SATA SSD MLC include capacities from 32GB~512GB; it is suitable for critical industrial applications, such as networking, server / cloud, vehicle, medical and surveillance.
Cervoz Industrial Powerguard 2.5" SATA SSD MLC include capacities from 32GB~512GB; it is suitable for critical industrial applications, such as networking, server / cloud, vehicle, medical and surveillance.
